vicol audio
 

WEBSHOP
PayPal Acceptance Mark

Please do not forget to add shipping at the end of your order.



If you do are not sure how much your total price is,  please e-mail us describing what you want.
be sure to tell us which Country you are located.
We will e-mail you back (usually the same day) with requested information.


Here are the parts you need to DIY a SHIGA MKII:
1. If you are looking for ready made and tested modules, with all components already soldered,
necessary
parts are:
    -
Shiga MKII CD transport main board. Please note that there are two versions - standard and high-grade
    -
SF-P101N-16P CD mechanic for Shiga MKII transport
    - Shiga MKII Infrared Remote
   -
Shiga MKII non-magnetic Al cd puck
   -
Shiga MKII main transfomer

2. Are you a DIY experienced in electronics and smd soldering   ?
    Than SHIGA MKII mini KIT is for you. Esential parts are there. Full documentation is on the website, so what are you looking for ?


Looking for a custom made finished SHIGA MKII transport ? mail us


  • SHIGA MKII MINI KIT
    SHIGA MKII mini KIT

  • Shiga MKII mini KIT
SHIGA MKII mini KIT
Limited offer, item available till 1st August 2014
Our low cost offer for those who like to build Shiga MKII from scratch.
The Kit contain all critical and hard to find Shiga parts:
- main Gold plated pcb board for Shiga MKII
- power supply Gold plated pcb board
- display and controll Gold plated pcb board
- infared remote Gold plated pcb board
- IC set LA9242M, LC78601RE, LA6541
- transistor set 2SA608NF, 2SB764E, 2SA1342,
- Vicol-Audio custom multiplexed LCD
- Citizen CSA-309 crystal.
- full set of ready made cables
Click
here to see what you get.
See product page for more information about SHIGA MKII
DIYAUDIO builders thread http://www.diyaudio.com/forums/digital-source/255887-shigaclone-mkii-black-builders-thread.html


At the end of your order please add shipping by clicking here or scoll down to last
icon.



  • SHIGA MKII CD Transport
    SHIGA MKII

  • Shiga MKII


Shiga MKII CD transport main board
Out of stock.
Pre-orders  1 - 31 August 2014 for a limited batch of 30units standard and
10units high-grade.
Delivery October - November 2014

Shiga MKII CD main board ready mounted and tested. This include, main DSP
& servo board, power supply board, custom display board, all cables ready made.
All boards are GOLD plated full mounted and tested.
CD mechanic, cd puck, trafo and remote may be ordered separately, see below.

High grade version include audiophile expensive parts and many custom
modifications:
- Mundorf Silver-Gold OIL capacitor for C8
- Vishay naked foil resistors for sp/dif divider
- Sanyo organic and kemet tantalum capacitors
- silver-mica in key places
- Tentlabs low jitter XO
- 2 low noise LDO miniregulators
- main power supply with LT1086adj
- smd parts mounted vertically in order to lower noise
Click here to see what you get.

 
At the end of your order please add shipping by clicking here or scoll down to last
icon.


  • SHIGA_MKII_mechanic
      Mechanic SF-P101N-16P

  • Shiga CD mechanic
SF-P101N-16P CD mechanic for Shiga MKII transport Out of stock.
Original 16 pin Sanyo mechanic for SHIGA MKII

Custom high-grade CD mechanic is also available for 45with preoder.
This include laser, monitor diode and PIN amplifier modifications.
Please 
e-mail us  for quantity discount price.

At the end of your order please add shipping by clicking here or scoll down to last
icon.


  • SHIGA MKII IR
    SHIGA Infrared Remote

  • Shiga Infrared Remote
Shiga MKII Infrared Remote
IR for Shiga, ready mounted and tested.
3V lithium battery is not included.

At the end of your order please add shipping by clicking here or scoll down to last
icon.


  • non-magnetic AL cd puck
    Non-magnetic CD puck

  • Aluminium CD puck
Shiga MKII non-magnetic Al cd puck
New CD puck specially designed for SF-P101N Shiga MKII transport.
Handmade custom AL cd puck made to fit Sanyo SFP101N-16P Shigaclone CD
mechanic.

At the end of your order please add shipping by
clicking here or scoll down to last
icon.


  • Custom Trafo
    SHIGA main transformer

  • Magnetic shield transformer
Shiga MKII main transfomer Out of stock.
Custom 30VA main power supply transformer for Shiga.
Ultra low noise magnetic shilded trafo.
Primary 115V/230V
Secondary 0V-10V-20V/1,5A

At the end of your order please add shipping by
clicking here or scoll down to last
icon.







  • High Density speaker cable 
    High density speaker cable

  • High density speaker cable
High density handmade speaker cable Out of stock.
1440 x 0.1mm version at 2.5m lenght, banana termination.
For other dimensions or spade termination please contact us.

At the end of your order please add shipping by clicking here or scoll down to last
icon.



  • SILVER-GOLD interconnect
    SILVER-GOLD interconnect 

  • Select type
Silver-Gold double shielding handmade interconnect cable.Out of stock.
Available in RCA and XLR (balanced) version. Length 1m = 39.3 inch
RCA connector is Furutech and for XLR we make use of Vampire.
For custom cables and other connectors please contact us.
For more details click on left image

Ready for shipping in 14-21 days.
All cables are individually handmade signed.


At the end of your order please add shipping by clicking here or scoll down to last
icon.


  • Shipping & handling

    Select your location
Worldwide shipping, packing and handling
All shippings are processed via Posta Romana.
Please select your location and add shipping to your order.
Rates are for parcel air-mail service - small package up to 1Kg, no insurance.
For packages over 1Kg extra rates will be applied. If you have a large order
please contact us before placing your order to get a price estimation.
Online tracking is provided up to Romanian borders and depending on your postal
service up to your door.
For DHL, UPS, FEDEX, PEGASUS or other carrier, please contact us.


Starting with 1st October 2012 Posta Romana have changed tarrifs.


Secured by PayPal
How PayPal Works